The basic quality requirements of flexible packaging for spray bottle:

1. Bag

The bag should not use obvious wrinkles, scratches, air bubbles. The color of the bag should be uniform. The seal of the bag should be firm, and there should be no openings, perforations, or leakage (paste). The compound bag should be firmly compounded and evenly coated.

2. Plastic packaging

The plastic seal should be firmly bonded without cracking. The surface of the spray bottle package should be clean and free of damage. There is no mis-installation, omission or inversion in the spray bottle package.

The basic requirements for makeup packaging materials:

1. Ingot tube

The body of the ingot tube should be straight, smooth, free of cracks, burrs (burrs), and should not have obvious scratches, and the color should be uniform and consistent. The components of the ingot tube should be tightly fit to ensure that the contents can be unscrewed or pushed out normally.

2. Makeup pen

The pen barrel and pen cover of the cosmetic pen should be smooth and upright, without glue or cracking. The combination of the pencil barrel and the pen cover of the cosmetic pen should be tight and suitable. The color of the pencil should be uniform.

Basic quality requirements of outer packaging for Cream jar:

1.box

The surface of the cream jar box should be smooth and straight, and there should be no obvious scratches on the bottom, burrs (burrs), severe deflation and damage. The tightness of the box opening should be appropriate. When taking the flower box, you can't use your fingers to force it to peel off, so as to pinch the cover edge and the bottom does not fall down. The mirror surface, contents and box inside the box should be firmly pasted, the mirror image is good, and there are no scratches or damage on the bottom.

2. Printing and labeling

The patterns and writing on the packaging and printing of cream jar should be neat, clear, not easy to fall off, and the color should be uniform. Labels for cream jar packaging should not be misposted, missed or reversed, and should be firmly attached. The labeling requirements are in accordance with GB 5296.3.

3. Flower box

The flower box should be tightly matched with the middle box packaging. The flower box should be clean, upright and flat, with the lid well covered, without wrinkles, edges or corners. The adhesive part of the flower box should be pasted firmly without any signs of pasting, cracking and mutual adhesion. The product has no wrong installation, missing installation and inverted installation.

4. Middle box

The middle box should be tightly matched with the flower box packaging. The middle box should be clean, upright, flat, and the lid should be closed. The adhesion part of the middle box should be firmly pasted without any signs of cracking, cracking and mutual adhesion. The cream jar has no wrong installation, missing installation and inverted installation. The middle box label should be correct, clean and complete, and the product name, specifications, number of boxes and the name of the manufacturer should be marked as needed.